This Proxxon mini scroll saw is the ideal machine for that delicate project: model building, toy manufacturing, and precision work.
Cut soft wood (e.g. bass wood) up to 1 3/16" (30 mm), hard wood up to approx. 25/64" (10 mm), plastic (including circuit boards) up to approx. 5/32" (4 mm) and non-ferrous metals up to 5/64" (2 mm) with standard fret saw blades.
The machined worktable of die-cast aluminum has a size of 6 19/64" x 6 19/64" (160 x 160 mm) and is equipped with an adjustable fence and miter stop with scale.
The ABS plastic body provides a very practical sliding door on the right side of the housing for the removal of saw dust. The saw is powered by a 110 - 120V motor (85 W) for prolonged, low noise performance and even supported by a quiet and wear-resistant toothed belt drive, running in a ball bearing assembly. The machine offers an electronically controllable stroke rate from approx. 150 - 2,500 strokes/min.
The machine has a very stable ribbed die-cast aluminum saw frame with 11 13/16" (300 mm) throat. The blade guide is equipped with an integrated blower. The patented head-part is height-adjustable in 3 positions and offers numerous advantages:
The lifetime of the saw blade is tripled after shortening it twice. So, the teeth in the middle part of the saw blade are finally used also.
With the head in the lowest position, working with a blade shortened to 2 3/8" is even more precise.
The lifetime of the saw blade is tripled after shortening it twice. So, the teeth in the middle part of the saw blade are finally used also.
With the head in the lowest position, working with a blade shortened to 2 3/8" is even more precise.